192.168.0.100 is another most popular IP address registered by IANA for private use. You can use this IP address within a local area network (LAN) for internal use only.
The 192.168.0.100 IP address is used by a network device or a router to open the admin console and make necessary changes to your router. If your router supports the 192.168.0.100 IP address, then you can use this IP address to open the admin console of your router and make necessary changes like setting up a firewall and changing the network settings, etc.
There are some alternate IP addresses available, which are also used by some of the most popular router brands. These IP addresses can include 192.168.1.1, 192.168.100.1, 192.168.10.1, or 192.168.8.1. If your router supports these IP address, you can use them to open the admin console of your router.
Click here to access your admin console
The 192.168.0.100 IP Address is mostly . used by D-Link and NetGear. If you’re using the D-Link and Netgear router or broadband, you can use this IP address to login to your routers admin console.
What is 192.168.0.100 IP Address?
192.168.0.100 IP address is a private network IP address registered by IANA for internal use only. You can use this IP address to customize your routers setting and set your own configuration to the router.
This IP address is only accessible through a private network, and it can’t be used over the Internet connection. You can use this gateway IP address to set up your username and password, change firewall settings, and do a lot more kinds of stuff.
Most of the router brands like D-Link and Netgear use this IP address as their default gateway IP address of most of the router. If you’re using the router of these brands, then maybe your router uses this IP address as their default gateway IP.
Click here to access your admin console
How to Access the 192.168.0.100 IP Address?
If you don’t know how to access the 192.168.0.100 IP address, then don’t worry!
In this guide, we’re going to share the full steps through which you can log in to your router which belongs to 192.168.0.100 IP address and make necessary changes like setting up a password and managing the firewall settings.
Firstly, start your router and connect with the wifi network of your device or you can also use the ethernet cable to connect with your router. Once you’re connected with the router, type 192.168.0.100 in the address bar of your browser or click here to open the admin console at 192.168.0.100 IP address.
Once this IP address is open in your browser, you will see a login page where it asks for the username and password. If you already have the username and password of your router, use them to log in to your router. And if you’re not aware of the username and password, click here to check the default username and password in our router database.
Once you get the default username and password, enter them on the login page and click on the “login” button. Now it will redirect you to the router’s homepage. You can manage n number of things from that panel including changing of your username and password or even changing the network setting.
Furthermore, you can even block and set rules on end devices directly from the router’s config page.
Default Username and Password of My Router?
If you don’t know the default username and password of your router then you can check the default username and password on the backside of your router.
Mostly when you buy the router, it comes with the default username and password on the backside or on the user manual. In case if you don’t have the default username and password, you can check the password in our database here.
But before checking the username and password in our database, you can use the sequence of below usernames and passwords to check if any of them works for your device.
If none of the above username and passwords works for you, then you can search for the default password in our database here using your routers brand and model name. You can also find the default credentials printed on the backside of your router or the user manual.
Frequently Asked Questions (FAQ)
How to Access the 192.168.0.100n IP Address?
If you don’t know how to access the 192.168.0.100 IP address, then open your browser and type http://192.168.0.100 in the address bar or click here to access the 192.168.0.100 IP address.
To be able to access this IP address, make sure you’re connected with the router’s network through wifi or through an ethernet cable.
I Don’t Remember My Default Username and Password.
If you aren’t aware with your default username and password, then you can find the default username and password printed on the backside of your router or you can also check the default details in our router’s guide here using your router model name.
I Don’t Know How to Reset my Device.
You can easily reset your device by using the reset button. You can easily find the reset button on the backside of your router.
Once you find the reset hole, use any sharp pin object or you can also use the SIM ejector tool to click on the button inside that hole to reset your device.